If The shop's back door only latches if someone slams it.
Then Adjust the closer and realign the strike.
Usually the closer is out of adjustment or the strike has drifted; both are set, not replaced.

A key that needs jiggling, a bolt that only throws when you lift the handle, a cylinder that spins loose in the door. These are small annoyances in South-West Oxford homes that become lockouts if ignored. We tune, rebuild or swap the part at fault and leave the door working like it did when it was new. We serve Dereham Centre, Mount Elgin, Salford, Verschoyle and Zenda as well.
Same fees day or night · South-West Oxford
Pick the closest, or call (226) 705-0421
Lockout ServicesLocked out of a home or business, a key snapped in the lock or a lock that has seized: entry with the least damage…
Change or Rekey LocksNew keys for the locks you have, or new locks where the hardware has worn out: rekeying, replacement, deadbolts, smart…
High Security LocksCylinders and deadbolts built to resist picking, bumping and drilling, keys that cannot be copied without…
Commercial LocksLocks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key…Smart locks, keypads and fobs are only worth fitting to doors in South-West Oxford that are mechanically sound. So we check alignment and the bore first, install the hardware, then sit with you while codes are set and a phone is paired. Every electronic lock we fit keeps a mechanical key as a backup, and you leave knowing how to use both.
Nearby Woodstock, East Zorra-Tavistock, Ingersoll, Norwich, Zorra, Bradburn Subdivision, Perrys Lane and Burgessville
Hardware chosen for winter, fitted with care.
18 years in business · Reach out and we'll explain the options: (226) 705-0421
South-West Oxford
The lock services below are the ones people in South-West Oxford ask for by name: get me back in, change the locks, rekey the house, put a deadbolt on this door, sort out the shop, open the safe. Each page answers the questions that usually come next, and the technician answers the rest at the door.

Motorcycle & Scooter Keys, Transponder Key Programming, Break-In Damage Lock Repair, Safe Installation &…
Tap a situation. The answer opens here.
If The shop's back door only latches if someone slams it.
Then Adjust the closer and realign the strike.
Usually the closer is out of adjustment or the strike has drifted; both are set, not replaced.
If The fire exit alarm sounds every time staff use that door.
Then Service the exit device and rethink the routine.
Exit alarms are meant to sound; if staff need that door daily, an arrangement that still lets everyone leave freely is found.
If The storefront lock is worn and the key barely catches.
Then Replace the cylinder with a commercial-grade one.
Storefront cylinders take a beating; a heavier grade is built for that traffic.
OxfordOntario
Every square is one home in a hundred.
Insurers ask policyholders to document the loss, keep damaged property and hold on to receipts, and a securing visit is expected rather than discouraged, because an open door invites more loss. Photograph everything as found, keep the broken hardware in a bag, keep the invoice, and call your insurer as soon as the house is safe. The adjuster can see the old parts and the photos; the door itself need not stay open.
Assume that copies of the old keys exist somewhere and act on the day you take possession. Walk every exterior door with the locksmith, keep hardware that is sound and have it rekeyed to a new key, replace hardware that is worn or too light, and add a deadbolt to any door that lacks one. Ask for everything to be keyed alike so you leave with one key and a known number of copies.
Well, with a little planning. Cold reduces battery capacity, so the locksmith fits fresh cells of the type the maker specifies and points you to the low-battery alert, and a new set before the first hard frost is a good habit. The bolt is aligned with clearance so a door that swells or shifts with freeze and thaw does not strain the motor. Keep ice off the keypad, and use lock de-icer only in the key cylinder, never on the touch surface.
Delivery and the final move into position are part of the service, using equipment suited to the safe's actual weight rather than improvising with furniture dollies or straps meant for lighter loads. The route in is measured ahead of time so doorways, stairs, and tight turns are accounted for before the unit arrives, which avoids a surprise at the one hallway that turns out to be too narrow.
On-site assessment
Book your South-West Oxford locksmith visit
(226) 705-0421, open 24/7.
On-site assessment preferred · (226) 705-0421, open 24/7