If The shop's back door only latches if someone slams it.
Then Adjust the closer and realign the strike.
Usually the closer is out of adjustment or the strike has drifted; both are set, not replaced.

Turnovers, lost keys, a tenant who changed the lock without asking: rental property in Perrys Lane keeps a locksmith busy in predictable ways. We rekey between tenants, keep unit keys organised under one master, fit hardware that survives heavy use, and write up what was done for your records. This page also covers Dorland, Tollgate, Willow Lake, Beachville and Golspie.
Same fees day or night · Perrys Lane
Pick the closest, or call (226) 705-0421
Lockout ServicesLocked out of a home or business, a key snapped in the lock or a lock that has seized: entry with the least damage…
Change or Rekey LocksNew keys for the locks you have, or new locks where the hardware has worn out: rekeying, replacement, deadbolts, smart…
High Security LocksCylinders and deadbolts built to resist picking, bumping and drilling, keys that cannot be copied without…
Commercial LocksLocks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key…Smart locks, keypads and fobs are only worth fitting to doors in Perrys Lane that are mechanically sound. So we check alignment and the bore first, install the hardware, then sit with you while codes are set and a phone is paired. Every electronic lock we fit keeps a mechanical key as a backup, and you leave knowing how to use both.
Nearby Woodstock, East Zorra-Tavistock, Ingersoll, Norwich, South-West Oxford, Zorra, Bradburn Subdivision and Burgessville
Hardware chosen for winter, fitted with care.
18 years in business · Reach out and we'll explain the options: (226) 705-0421
Perrys Lane
A door in Perrys Lane has more parts than most people think: the cylinder, the latch, the deadbolt, the strike, the closer, the hinges and the frame around them all. The services listed here touch every one of those parts, from a straightforward rekey to a full storefront hardware overhaul.

Vintage Mortise Lock Service, Break-In Damage Lock Repair, Panic & Exit Hardware, Motorcycle & Scooter Keys…
Tap a situation. The answer opens here.
If The shop's back door only latches if someone slams it.
Then Adjust the closer and realign the strike.
Usually the closer is out of adjustment or the strike has drifted; both are set, not replaced.
If The fire exit alarm sounds every time staff use that door.
Then Service the exit device and rethink the routine.
Exit alarms are meant to sound; if staff need that door daily, an arrangement that still lets everyone leave freely is found.
If The storefront lock is worn and the key barely catches.
Then Replace the cylinder with a commercial-grade one.
Storefront cylinders take a beating; a heavier grade is built for that traffic.
OxfordOntario
Every square is one home in a hundred.
A deadbolt keyed on both sides is sometimes suggested for doors with glass beside them, but on a main escape door it means finding a key to get out. A door people use to leave the home should open from the inside without a key or special knowledge, especially in an emergency. A single-cylinder deadbolt with a thumb-turn, paired with a reinforced strike and a proper glass film if needed, keeps both security and a clear way out.
Insurers ask policyholders to document the loss, keep damaged property and hold on to receipts, and a securing visit is expected rather than discouraged, because an open door invites more loss. Photograph everything as found, keep the broken hardware in a bag, keep the invoice, and call your insurer as soon as the house is safe. The adjuster can see the old parts and the photos; the door itself need not stay open.
Three habits cover most of it. Lubricate the cylinder with a dry lock product twice a year and keep oils out of it. Check that the door locks with no pressure on it each spring and fall, snugging hinge and strike screws when it starts to drag. Keep a lock de-icer handy and fit a keyhole cover on exposed doors. And act on the first stiff turn, because a lock that still turns is a smaller job than one that has stopped.
Yes, within reason. A later mortise case can take a modern high-security cylinder of the right thread and cam, chosen for its pick resistance; stopping casual key copying is a separate question, answered by fitting a restricted or patented key system alongside it. Longer screws into the strike and a properly seated deadbolt add more than most people expect. For a bit-key lock, the practical gains are a full-throw deadbolt and a good strike; if more is wanted, a separate modern deadbolt above it leaves the original lock untouched.
On-site assessment
Arrange a visit to your Perrys Lane storefront
(226) 705-0421, open 24/7.
On-site assessment preferred · (226) 705-0421, open 24/7