If The shop's back door only latches if someone slams it.
Then Adjust the closer and realign the strike.
Usually the closer is out of adjustment or the strike has drifted; both are set, not replaced.

Every street in Zorra has a door that sticks, a deadbolt that needs a shove, or a key that was lent out and never came back. We rekey, repair and replace lock hardware for homes and businesses here, explain what we find in ordinary words, and leave you with keys that turn the way they should. Nearby, we also work in Embro, Lakeside, Bennington, Brooksdale, Cody's Corners, Harrington, Holiday, Uniondale and Youngsville.
Same fees day or night · Zorra
Pick the closest, or call (226) 705-0421
Lockout ServicesLocked out of a home or business, a key snapped in the lock or a lock that has seized: entry with the least damage…
Change or Rekey LocksNew keys for the locks you have, or new locks where the hardware has worn out: rekeying, replacement, deadbolts, smart…
High Security LocksCylinders and deadbolts built to resist picking, bumping and drilling, keys that cannot be copied without…
Commercial LocksLocks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key…Winter is part of how we work in Zorra. Doors swell and shrink, frames shift, keys snap in cold cylinders, and salt finds its way into hardware. We choose lubricants that stay fluid in the cold, set strikes with the seasons in mind, and show you the small habit that stops a key from freezing in the lock.
Nearby Woodstock, East Zorra-Tavistock, Ingersoll, Norwich, South-West Oxford, Bradburn Subdivision, Perrys Lane and Burgessville
Hardware chosen for winter, fitted with care.
18 years in business · Reach out and we'll explain the options: (226) 705-0421
Zorra
Homes in Zorra bring us sticking deadbolts, lost keys, moves and upgrades. Businesses bring storefront doors, back doors, key control and safes. The services below cover both sides in detail, so whichever kind of door you are standing in front of, the right page is a click away.

Business Lockout Service, Gate & Building Entry Locks, Home Lockout Service, High Security Locks, Safe…
Tap a situation. The answer opens here.
If The shop's back door only latches if someone slams it.
Then Adjust the closer and realign the strike.
Usually the closer is out of adjustment or the strike has drifted; both are set, not replaced.
If The fire exit alarm sounds every time staff use that door.
Then Service the exit device and rethink the routine.
Exit alarms are meant to sound; if staff need that door daily, an arrangement that still lets everyone leave freely is found.
If The storefront lock is worn and the key barely catches.
Then Replace the cylinder with a commercial-grade one.
Storefront cylinders take a beating; a heavier grade is built for that traffic.
OxfordOntario
Every square is one home in a hundred.
A deadbolt keyed on both sides is sometimes suggested for doors with glass beside them, but on a main escape door it means finding a key to get out. A door people use to leave the home should open from the inside without a key or special knowledge, especially in an emergency. A single-cylinder deadbolt with a thumb-turn, paired with a reinforced strike and a proper glass film if needed, keeps both security and a clear way out.
Fewer than most businesses think, and every one of them named. Two people who can open, one of whom can be reached on a day off, cover the door. Cleaners and contractors get a key only if they need one and hand it back when the arrangement ends. Write down who has what, collect keys when people leave, and rekey when one does not come back. Interior keys for the cash office or stockroom follow the same rule on a shorter list.
Assume that copies of the old keys exist somewhere and act on the day you take possession. Walk every exterior door with the locksmith, keep hardware that is sound and have it rekeyed to a new key, replace hardware that is worn or too light, and add a deadbolt to any door that lacks one. Ask for everything to be keyed alike so you leave with one key and a known number of copies.
The usual cause is meltwater getting into the keyway during a thaw and refreezing overnight, which stiffens the plug or blocks it outright, along with cold thickening any grease left inside from the factory. Road salt tracked onto ground-level hardware adds corrosion on top of that. A cylinder treated with the lubricant its maker specifies, kept clear of standing water, generally handles a winter far better than one left as it came, and a weather-rated replacement, kept up the same way, holds up better once the current one is pitted.
On-site assessment preferred · (226) 705-0421, open 24/7